Kind of like those tatoos? Are you going to inlay it all the way around the neck?
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| MOP Barb Wire Needed http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=3208 |
Page 1 of 2 |
| Author: | LanceK [ Tue Sep 13, 2005 4:20 am ] |
| Post subject: | |
Hey folks, I need an inlay set of barb wire, at least a single for a 12th fret marker, but I'm considering using barbs as fret markers all the way up. What I had in mind was a single barb centered on a 1" or so length of wire for all dots, then for the 12th fret, a double barb. Id like this to me in MOP, and precut if possible. Does anyone know where I could get this? Thanks LanceK |
|
| Author: | Brock Poling [ Tue Sep 13, 2005 4:24 am ] |
| Post subject: | |
Kind of like those tatoos? Are you going to inlay it all the way around the neck?
|
|
| Author: | Shane Neifer [ Tue Sep 13, 2005 4:32 am ] |
| Post subject: | |
Andy Depaule.....Try him out. I am meeting with a company Thursday to discuss inlay materials and they do CNC work as well. But I may be a little bit before I have it all in place but I think that Andy can set you up. Shane |
|
| Author: | Michael Dale Payne [ Tue Sep 13, 2005 4:48 am ] |
| Post subject: | |
Andy doing CNC this new HUMMM!!! |
|
| Author: | Shane Neifer [ Tue Sep 13, 2005 4:53 am ] |
| Post subject: | |
I could be wrong about the CNC but he does offer to have your logo made for you in their plant overseas. They would have to be pretty darn good on the ole fret saw to offer this when you would be setting up to rout out the cavity. Could ask him I guess! |
|
| Author: | Steve Kinnaird [ Tue Sep 13, 2005 4:58 am ] |
| Post subject: | |
Lance- Like this? 
I believe a fellow here in Texas cut these. You could ask Jamie. (Jamie Kinscherff, that is. This is one of his guitars.) Steve |
|
| Author: | LanceK [ Tue Sep 13, 2005 5:02 am ] |
| Post subject: | |
YES! Thanks Steve! |
|
| Author: | arvey [ Tue Sep 13, 2005 5:04 am ] |
| Post subject: | |
Andy's plant in Viet NAm does it all by hand which actually keeps the price down nicely. He is now doing my logo and you would swear they are done on CNC these guys are so good, cheaper than CNC though. |
|
| Author: | Steve Kinnaird [ Tue Sep 13, 2005 5:08 am ] |
| Post subject: | |
And one shot of the rosette, which I just love: 
I've seen one of these with the barbs done in 14 Karat gold, and it was just stunning. Steve |
|
| Author: | LanceK [ Tue Sep 13, 2005 5:11 am ] |
| Post subject: | |
Im not 100% sure, but I think Tom Ellis PPI cuts and sells them? |
|
| Author: | Michael Dale Payne [ Tue Sep 13, 2005 5:14 am ] |
| Post subject: | |
I think you maybe. I have delt with Andy a while. In the past his work has been hand cut in Aisia. Very good work by the way and you will not beat his price any where. |
|
| Author: | Michael Dale Payne [ Tue Sep 13, 2005 5:17 am ] |
| Post subject: | |
I believe that Tom requires that you by a production run min. order. I wanted to buy his poker hand a while back but I would have had to by a full production run I think was 40 pcs if I remember right. Check with him though I could be wrong. |
|
| Author: | Steve Kinnaird [ Tue Sep 13, 2005 5:24 am ] |
| Post subject: | |
Lance, I believe you are correct. That name does ring a bell. Steve |
|
| Author: | Michael Dale Payne [ Tue Sep 13, 2005 5:24 am ] |
| Post subject: | |
An interesting thing is, their saws are hand made as well as ther blades. They do not use manufactured blades, instead they take spring steel strips and tap seration into them by hand. Andy once told me, he took them a bunch of high grade blades and they did not like them and told him thanks but no-thanks |
|
| Author: | old man [ Tue Sep 13, 2005 5:37 am ] |
| Post subject: | |
Lance, try this site. Enter barbed wire in their search box at the top of the page. http://www.custominlay.com/cgi-bin/store.new/store.cgi?&shop =live&cart=40298042x8594&session=424a8c50589 Ron |
|
| Author: | bob J [ Tue Sep 13, 2005 6:48 am ] |
| Post subject: | |
Lance, Who is this for, some yahoo cowboy? 
|
|
| Author: | Michael Dale Payne [ Tue Sep 13, 2005 7:20 am ] |
| Post subject: | |
[QUOTE=bob J] Lance, Who is this for, some yahoo cowboy? [/QUOTE]
Crarful.. I resemble that remark  
|
|
| Author: | LanceK [ Tue Sep 13, 2005 7:28 am ] |
| Post subject: | |
[QUOTE=bob J] Lance, Who is this for, some yahoo cowboy? [/QUOTE]
Close! A cow girl! 
Christene LeDoux 
|
|
| Author: | Michael Dale Payne [ Tue Sep 13, 2005 7:31 am ] |
| Post subject: | |
Oh cool I just got an idea for the border on a tag
|
|
| Author: | Michael Dale Payne [ Tue Sep 13, 2005 8:05 am ] |
| Post subject: | |
[QUOTE=LanceK] d Close! A cow girl!
Christene LeDoux [/QUOTE]
Makes me want to write a song with a line in it that goes... "and a warn-out tape of Chris LeDoux" ... Wait hasn't someone done that already. Ahhhhhh, doller short and a turn around lyric late again |
|
| Author: | L. Presnall [ Tue Sep 13, 2005 8:40 am ] |
| Post subject: | |
Lance, thank goodness! I thought for a second there you were building a guitar for Pamela Anderson!
|
|
| Author: | LanceK [ Tue Sep 13, 2005 8:53 am ] |
| Post subject: | |
[QUOTE=L. Presnall] Lance, thank goodness! I thought for a second there you were building a guitar for Pamela Anderson! [/QUOTE]
I WILL!
|
|
| Author: | L. Presnall [ Tue Sep 13, 2005 9:36 am ] |
| Post subject: | |
Well, I just thot I may've been the only guy to see (part) of an episode of that show!
|
|
| Author: | L. Presnall [ Tue Sep 13, 2005 9:37 am ] |
| Post subject: | |
If you did build, I go with a Jumbo!
|
|
| Author: | Terry Stowell [ Tue Sep 13, 2005 9:44 am ] |
| Post subject: | |
Lance, will you stop at NOTHING?! |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|